It started as a 1992 YJ with a CJ-7 front clip. The engine is a 4.3 chevrolet on propane. The trannsmission is a TH350 with a transgo kit intsalled. It has a box for rocks 231 in front of a twin sticked dana 300 transfer case. Suspension wise is has a double triangulated front and single triangulated in the rear. It has 18" sway-away airshocks on all corners, and a Currie anti-rock sway bar in the back. The frame was cut off in the front and rear and replaced with tubing to allow for up travel of the axles. The axle in the front is a chevy dana 60 and there is a dana 70HD in the back. 39" comp compound krawlers on H2 wheels complete the axle package. The interior is very simple, all wires were removed from the Jeep along with the dash so the wiring could be minimal. Only the temperature and oil pressure gauges were replaced as they are the only important ones. The seats are PRP comp high backs with Corbeau 5-point harnesses. Lastly there is a fire extinguisher mount that has come in handy on more than one occasion.